Sea Levels Rise

It is no new scientific fact that there is a slow steady increase of temperature; we’ve been studying and recording changes for a few decades. For some reason people are only now starting to take notice of how desperate the situation is.

Due to the increased temperature, sea levels are on the rise. It now is easier for boats full of scientists to access the Northwest Passage for research due to the polar icecaps melting . Areas that were once almost unreachable are now becoming navigational and the search for precious gems, gold, and oil is on! There is no end to mans greed.It makes sense that when the sea levels rise the ground surfaces slowly disappear. We will lose our agriculture farmlands. There may not be enough food needed to sustain ourselves, let alone other countries that we already support. Many farmers will lose their farms and their lifestyle.

Should sea levels on the rise be a worry about freshwater? Our drinking water is not a luxury it is a necessity and is as important for people, plants, and animals. The possible damage to freshwater due to rising sea levels should be a major worry to all of us.

For hundreds of years polar bears have been the king of the Arctic ice and roamed over vast areas of icy tundra. But with the icecaps melting away, and the distance between ice flows becoming greater, many polar bears have drowned from exhaustion before reaching shore. It also makes hunting their primary source of food, the seal, more difficult. Dying of hunger is now a probable fate for many of them.

The total extinction of many of the world’s beloved land animals may be just around the bend due to rising sea levels.

Show some concern about the environment and save money at the same time by searching for eco friendly products from sites like http://www.EnergySavingProject.com.

The author is a specialist in environment, energy efficiency and renewable energy.

Share and Enjoy

Analysis of Cleanliness

You cannot control that which you do not measure.

In more and more industries, the exact knowledge of particle contamination is gaining in importance. Contamination of materials in dimensions of a few micrometers was mainly of concern for the pharmaceutical and semiconductor industries. However, not only manufacturers of circuit board components, but also traditional car parts suppliers face new demands on particle recognition and contamination source identification.

Cleanliness for the automotive parts manufacturers has become a huge topic in today’s ever challenging continuous improvement world. The need to define, measure and control the levels of particulate contamination on product is the new norm for suppliers and automotive OEM’s.

Cleanliness directly relates to product warranties, reliability, performance and safety issues. It has long been known that a dirty product gives us poor quality and low life expectancy. The dirtier the transmission from new, the less time it will last.

It is crucial now to identify particles and their source so that effective elimination can be achieved. Residual contamination consists of particles that persist on the component’s surface after the final step in manufacturing. Such contaminants are introduced via parts from suppliers or arise during processing. After vehicle assembly, the contaminant particles can cause severe damage, loss of function or reduce the lifetime of the product.

Cleanliness is defined as the contamination level of a component surface. Common measures to quantify the cleanliness are mass of the contaminants as well as number, size of the dirt particles. In general, the customer will specify contamination limits. The supplier then has to maintain these levels and document them regularly by means of contamination analysis.

The analysis of the contamination has to be proven to not affect the result and to be effective in evaluating all the contamination present. Methods of extraction and evaluation are specified in the international standard ISO 16232. Particular attention must be paid to the extraction method to ensure no contributing factors are introduced to the evaluation. There are different methods of counting the resulting extracted particles but by far the most accurate, repeatable and cost effective is automated microscope analysis. The microscope with software can scan the filter membrane; sort the particles by size class and even determine basic material composition (metal, non-metal, fiber). Once the data is gathered a custom report can be generated based on the customer requirements.

For more information on cleanliness analysis, visit http://www.onclean.com

Chris Trower is the President of Onclean Labs Inc, an Ontario based lab specializing in third party cleanliness analysis testing.

Share and Enjoy

No Bailouts Necessary: Green Transportation

Unless you have been trapped in a cave for the last seven months you are well aware of the disaster overtaking the American automobile industry. Our government is using billions of taxpayer’s dollars to prop up an industry that has been one of the leading facilitators of numerous ills in our society, which will also take billions of dollars to repair, if it is even possible to do so. 

Air pollution which contributes to increased medical costs, urban sprawl, a negative balance of payments from importing oil and global warming can all be traced at least in part to our addiction to the automobile. Now that I’ve ranted about the autos effect upon our society I also greatly acknowledge that we all, myself included, greatly enjoy the mobility and freedom provided by the pernicious machine. We can’t live with ‘em and we can’t live without ‘em. What are we to do?

A lot has been written about the currently nonexistent plug-in electric car. This machine when it finally hits the market could help solve some of our problems but current pricing estimates place the car in the forty thousand dollar range. I’m sure of one thing, it won’t solve many problems if you don’t sell them and at that price I’d hedge my bets.

However, there is one personal transportation option on the market that fits into all of President Obama’s initiatives for energy self sufficiency, global warming (reduction of green house gases), health care (exercise and weight loss), environmental protection (reduction of air and water pollution), and infrastructure renewal.   That option is the Electric Bicycle.

The electric bike using lithium batteries (traditional lead-acid is very environmentally harmful) can go, depending on load factors and riding habits, roughly twenty miles at twenty miles an hour on one charge. It is almost completely silent, gives off no emissions, does not use foreign oil, does not require much room to operate or park, never needs a tune up and provides exercise. It eliminates many of the drawbacks of riding a traditional bicycle for basic transportation while having few of its own. I recognize that not many of us are hardy enough to ride a bike in the rain, snow or freezing cold but that applies as well to motorcycles, motor scooters and traditional bicycles. The electric bike can get you farther, faster without arriving at your destination soaked in sweat. It can operate in many places where other motorized vehicles cannot and makes taking hills a cinch. Riding five or ten miles to work is no big deal and you can simply pedal around bottled up traffic. Usually the lightweight batteries easily detach from the bike and can be carried into your place of work or school for recharging.

Some electric bicycles offer high tech extras such as LiFePO4 batteries that are good for a thousand recharges, regenerative braking that helps recharge the battery much as a Prius does, and internal gearing to generate more torque for uphill climbs. Most electric bikes use what is referred to as a hub motor. This is not a traditional gear or belt-drive motor but is built directly into the hub of one of the wheels. This motor contains two internal rings of opposing magnets that when power is applied causes the wheel to spin. Such motors need little service and never require oil changes, spark plugs or new belts.

Electric bikes come in several of styles. There are the traditional “beach cruiser” and mountain bike styles as well as electric folding bikes, tricycles and “road bikes”.   The electric folding bikes are particularly interesting. Smaller and lighter than a traditional bicycle, they easily fold up and fit into a car trunk and can be carried on a commuter or subway train with little effort. You can take the train to your stop, unfold the bike and pedal on your way. They are also useful for those who live in tight quarters and have no external place to store their ride.

For those of you that are moderately handy with tools, there are a number of electric bike kits on the market that allow you to adapt an ordinary bicycle into an electric bike. One company, Worldwide Electric Bikes, has a particularly well-designed kit that has many of the features I previously mentioned. These electric bike kits do not require a high level of mechanical ability to install. A few common hand tools, a basic understanding of how things go together and the ability to read directions is all that is required. However, if you don’t know the difference between a crescent and a hex wrench, you may wish to buy a pre-made bike or have someone install the kit for you. If you do choose to go the kit route, you can end up with a much more powerful and sophisticated bike for substantially less money than a factory built electric bike. 

Electric Bicycles in all forms have long been a staple of personal transportation in Europe and Asia where there are hundreds of thousands in operation. In the United States bicycles have traditionally been dominated by the toy or recreation market or for the dedicated enthusiast. In both Europe and Asia, cycling has been a traditional means of basic transportation. I believe that this is going to be more and more the case in this country. People are avidly seeking relief from the high financial and societal cost of automobiles. The electric bicycle, while not a panacea, is definitely poised to help provide a portion of that relief.

Electric Bicycles are inexpensive to purchase, require no license or insurance, have a negligible cost of operation and are totally “green”. So, what’s not to like?

http://www.worldwideelectricbikes.com

Share and Enjoy

Report Greenhouse Gases (GHGs)

The newly formed Obama administration has listed greenhouse gas (GHG) tracking and reporting as a major goal, with the objective of protecting the future of the environment by reducing today’s carbon footprint. If no action were taken, the makeup of the earth would significantly altered. Future actions will establish a market drive carbon cap and trade program to drive GHG emissions reductions.

Greenhouse Gas tracking is outlined in The Climate Registry Protocol, which details the requirements for mandatory monitoring and tracking. The premise around greenhouse gas tracking are included in the U.S. Clean Air Act, aimed at improving air quality and lowering greenhouse gas emissions.

The Environmental Protection Agency (EPA) proposes mandatory reporting of the gases contributing to global climate change from about 13,000 facilities nationwide. These facilities account for the majority of greenhouse gas emissions within the United States and present a logical starting point for emissions reductions in the US. The regulation would cover companies that either release large amounts of greenhouse gases (GHG) directly or produce or import fuels and chemicals that when burned emit large amounts of carbon (CO2) gases.

One of the major focuses of the Greenhouse Gas tracking protocol is refrigerant gases used in refrigeration and cooling systems by numerous facilities, including manufacturers, food processors, retailers, grocery stores, office buildings, municipalities and hospitals, just to name a few. Because of their chemical makeup, refrigerant gases contain significant levels of carbon in the form of chlorofluorocarbons (CFCs), hydrochlorofluorocarbons (HCFCs) and perfluorocarbons (PFCs). Use of these compounds has been regulated under the U.S. Clean Air Act for several years.

Greenhouse gases absorb and release radiation into the atmosphere, setting off a global warming effect on earth. The intent and overall goal of GHG tracking relates to better collection and management of the emissions data now so informed decisions can be made about future carbon trading schemes. The tracking protocols also help government entities to more accurately inventory the amounts of emissions reaching the atmosphere. The new GHG legislation puts in motion the data collection, organization, and first stage reporting mechanisms to allow the US to accurately calculate and maintain a GHG emissions baseline across the entire economy. This will allow for better understanding today as well as to determine progress for future Cap and Trade programs. With this accurate information, it can be determined if the guidelines are effective in lowering the harmful effects of these substances to the ozone layer.

Greenhouse Gas tracking involves measuring direct and indirect emissions and keeping extensive records on its usage, maintenance, leak containment and disposal. Heating and cooling systems, as well as other energy consumption, are defined as direct emissions.

Better and more effective GHG management is an objective of the current US government. No longer will the US sit by and watch the world attack the issue of climate change. The US is now taking action to lower carbon emissions to the betterment of future generations. By taking no action, the earth’s makeup would significantly change, with humans and animals adversely affected and marine and plant life severely damaged.

Greenhouse Gas (GHG) management and reporting is now falling under the EPA regulations contained within The U.S. Clean Air Act because the causes of global climate change is now well know. Human activities and the use of global warming substances, like refrigerant gases, are all leading to increased global warming. The substances are carbon dioxide, chlorine, bromine, nitrous oxide, chloroflurocarbons, hydrofluorocarbons, methane, methyl bromide, methyl chloroform, sulfur hexafluoride, hydroxyl, perfluorocarbobs, halons, carbon tetrachloride, fluorine, and the fluorinated gases hydrofluorinated ethers and nitrogen trifluoride. The mandatory law is aimed at reducing the use of these substances to lower the effects of global warming.

Beginning in 2010, GHG management, tracking, and reporting will be environmental law for the highest emitting facilities. Part of the management will revolve around better tracking and reporting of refrigerant gases. Entities must submit usage reports and service records for all refrigerants having high GWP. Special calculations are applied to refrigerants when any leads occur. The GHG emission reporting rules and related protocols allow for progressive companies to take advantage of software already created to help with carbon emissions reporting. Some web applications allow organizations to track GHGs to the asset level across global, distributed facilities.

Software provided by Verisae tracks carbon dioxide (CO2) gas emissions according to The Climate Registry protocols across all sites so companies can manage their carbon emissions and work towards reducing their carbon footprint. To learn more effective refrigerant management tactics and the tools, you can research http://www.Refrigerant-Tracker.com

Green Technology

Share and Enjoy

Green Computing

Green and Clean Computing

Little thought may be given to the energy consumption of computers, but as more and more computers are purchased each year, it is not just the number of computers that forces increased energy consumption but the way in which computers are being used that adds to the building energy burden. Research has shown that most computer desktops are not being used a great deal of the time they are running and are left on for long periods of time. As with other forms of energy consumption, electricity is wasted when it is not being used and this burns fossil fuels that emit carbon dioxide into the air and cause smog, acid rain and other detrimental environmental side effects.

The typical desktop computer consists of a system unit which houses the central processing unit (CPU), a monitor and a printer. The CPU may require 100 watts of electrical power; the monitor, which may be 15 to 17 inches, may require another 50-100 watts; a laser printer can use as much as 100 watts or more while ink printers use as little as 12 watts while printing. The cost for operating a 200 watt system all day and night, everyday, would be $125 annually, while the cost of operation for normal business hours of 40 hours per week would range around $30 annually. Considering the tremendous benefits derived from using computers, this figure may not appear extensive, but when multiplied by the many computers used on a daily basis in this country, the total grows phenomenally.

There are many ways to reduce personal computer energy consumption. Computers, printers and monitors can be turned off when not in use. Many years ago, it was considered harmful to the computer if it were turned on and off periodically during the course of a day. However, the internal circuitry of personal computers is designed to be protected from power damages that might result from on and off switching. Doing so will not substantially affect the computer’s useful life.

The use of screen savers wastes energy and should not be used. They go back to the days when, if not used, images would be ingrained on screens if they remained on too long, but updates in technology have long made the use of screen savers unnecessary.

The United States Environmental Protection Agency has also developed technology for computers and monitors that can be programmed to automatically power down to a lower power state when not in use. This “sleep mode” can reduce energy consumption by 60% to 70% and these “Energy Star” computers serve to gain efficiency without any loss in computing performance.

Green computing extends beyond the personal computer to the use of related devices and materials. For example, paper waste can be reduced by printing as little as possible and only when necessary, recycling waster paper, using electronic mail instead of faxing to eliminate the need to produce a hard copy, and trying to print on both sides of the page when possible. In addition, printer and toner cartridges can be recycled. Although this is a practice that has been discouraged in the past by printer and toner cartridge manufacturers, such recycled cartridges save resources and reduce pollution and solid waste. Disposing of electronics as well can be done through recycling agencies to reduce waste and provide for recycling of functional equipment.

Finally, green computing also means not buying new equipment unless there is a real need for it. Close investigations can be made regarding upgrading hardware or software before purchasing a new computer. However, if the determination is made that a new computer system should be purchased, there are “Energy Star” computers, monitors and printers on the market. In addition, ink jet printers use 80% to 90% less energy than laser printers and soon, even “Green Computers” will reach the marketplace for sale.

Visit http://www.OCRuggedLaptops.com for more information about the rugged laptop industry.

Green Tech News

Share and Enjoy

A Global Disaster From the Perfect Solar Storm

The average solar cycle lasts for eleven years. The cycle includes a minimum of solar activity and a maximum. The sun is unusually quiet right now and has been for some time but there should be an increase in solar activity at some point in the near future.

The best current scientific estimate for the next solar maximum is 2012. If this estimate is correct, there is still a few years to try and prevent the potential of a future global disaster. A disaster that would begin on the surface of the sun and could end with tragedy on earth.

The surface of the sun is a mass of plasma that contains highly charged energy particles. Once in a while, some of these particles escape the suns surface and a mass of plasma travels through space on the solar wind. This process is known in scientific terms as a coronal mass ejection but it can also be called a solar storm.

A disaster for the planet would occur if a solar storm reaches and hits the earths magnetic shield in just the right way. If it were to happen, millions of people would lose their lives and the planet would be thrown into chaos as the technology that has become crucial to every day living suddenly gets taken away.

The perfect solar storm will start with skies that will be filled with a bright red aurora. However, soon everything will become dark as every electric bulb becomes devoid of light. The storms damage to the electric grid would be caused through an increased DC current. The runaway current would knock out and melt hundreds of key transformers within minutes, cutting off power for hundreds of millions of people.

Those damaged transformers cannot be repaired only replaced and installing a replacement takes a well-trained crew a week or more. Its incredible to consider that most major electrical utilities have just one or two suitably trained crews available for these type of transformer repairs. In addition, there are only a few spare transformers available and the rest would have to be built to order. Its a process that can take nearly twelve months.

So, the power blackout from the perfect solar storm would last for months but its not just the absence of light that would be the problem. Drinking water would still come through the taps for maybe half a day after the storm. With no electricity to pump water from reservoirs, there would be no more tap water after that.

The electric grid is necessary for almost all natural gas and fuel pipelines to operate. As a result, fuel and natural gas will quickly run out and without food delivery, supermarket shelves would soon become bare. Soon it would become necessary to control public hysteria and the military would have to be called in to restore civil order

There will be no power for heat, cooling or refrigeration until the grid is repaired and after their back up generators run out, hospitals will not be able to provide modern healthcare. A lack of water and food will result in spreading disease but Pharmaceutical companies without electricity will not be able to produce the necessary medicine.

Of course, many will say that this is absurd science fiction and it cannot happen here, but this chilling disaster scenario was outlined in a report released last January (funded by NASA) by the US National Academy of Sciences (NAS).

The fact is that a storm from the sun did hit the earths magnetic field in 1859. The effect of this solar storm on earth became known as the Carrington Event. The event was named after the amateur astronomer who observed two patches of intensely bright and white light emanating from a large group of sunspots that may have produced the event.

The solar storm that produced the Carrington Event created a red aurora across the planet from the poles to the tropics. Throughout the world, telegraph systems crashed, machines burst into flames, and electric shocks rendered operators unconscious. Compasses and other sensitive instruments reeled as if struck by a massive magnetic fist. It can happen again and the technology of the planet is now much more advanced and vulnerable.

The next solar maximum is estimated to return in about three years. A global disaster from the perfect solar storm can be prevented with proper contingency planning. There is still time for the government to be proactive and prepare to avoid disaster by creating a potential response to quickly repair the damage to the electric grid from the perfect solar storm.

James William Smith has worked in Senior management positions for some of the largest Financial Services firms in the United States for the last twenty five years. He has also provided business consulting support for insurance organizations and start up businesses. He has always been interested in writing and listening to different viewpoints on interesting topics. Visit his website at http://www.eworldvu.com or his daily blog at http://www.eworldvublog.blogspot.com

Going Green

Share and Enjoy

Historical Conservation Efforts

How often have we come across lovely historical sites suffering from neglect and misuse? Every country needs to take good care of its historic places. Because things like malls, stadiums and highways can be built again. But a historic place which is neglected and misused will lose its glory and slowly disintegrate into zilch. And no amount of action plan or noble intentions can ever bring a historic place back to its former glory when it has been totally neglected and abused by us. The oldest of historic sites can be preserved for the future generations if we have a proper plan for their conservation.

Conversation of historic places requires a systematic approach. If the historic site is conserved with the help of a proper plan, it will show amazing results. While chalking out a plan for the conservation of historic sites, it’s very important to keep the costs under control. If the costs go up to an unwanted level, it will draw criticism from the general public and act like a death sentence for the conservation of other similar projects in the future.

The first thing which should be done by the restoration experts is to check the age of the historic site. This can be easily achieved by conducting a series of scientific tests. It can also be done if there are public or archaeological records of the site. Once we know the actual age of the historic site, we get to know the actual worth of the site – this doesn’t mean that if a site is not very ancient – it’s not worth taking care of.

Also check the sturdiness of the materials which have been used on the historic site. This will need a proper list of all the materials used on all the structures found on the site. Factors such as the effect of temperature, humidity, weathering, fire, air pollution, storms and flood on the material found on the site needs to be studied in detail, so that best possible plan to prevent further degradation of the site can be prepared.

Don’t forget to note the architectural design of any structures present on the site. This is needed to take help of conservation experts according to the style they specialize in. Taking the help of the best of experts who are not competent in the architectural design displayed at the historic site would create a major problem for your conservation project.

Your team of conservation experts also need to keep a track of all the past repairs and changes made on the historic site. The problems faced by the previous restoration team while restoring or repairing the historic site too needs to be researched and noted down. Always remember materials like wood and leather rot quite easily, on the other hand stone articles and pottery items always manage to survive better. Once you have finished your complete study of the historic site, you can then do the restoration part of the site step by step in a phased manner till it is complete. You might even have to restrict the number of visitors, once it has been restored, as although the site has got its former glory, it might not be in a state that it can be exposed to an endless number of people everyday.

For more information on the historical sites of the world, visit Matt’s website about world historical sites, especially his favorite place, tikal.

News for Green Tech Stock

Share and Enjoy

Report Greenhouse Gases (GHGs)

The newly formed Obama administration has listed greenhouse gas (GHG) tracking and reporting as a major goal, with the objective of protecting the future of the environment by reducing today’s carbon footprint. If no action were taken, the makeup of the earth would significantly altered. Future actions will establish a market drive carbon cap and trade program to drive GHG emissions reductions.

Greenhouse Gas tracking is outlined in The Climate Registry Protocol, which details the requirements for mandatory monitoring and tracking. The premise around greenhouse gas tracking are included in the U.S. Clean Air Act, aimed at improving air quality and lowering greenhouse gas emissions.

The Environmental Protection Agency (EPA) proposes mandatory reporting of the gases contributing to global climate change from about 13,000 facilities nationwide. These facilities account for the majority of greenhouse gas emissions within the United States and present a logical starting point for emissions reductions in the US. The regulation would cover companies that either release large amounts of greenhouse gases (GHG) directly or produce or import fuels and chemicals that when burned emit large amounts of carbon (CO2) gases.

One of the major focuses of the Greenhouse Gas tracking protocol is refrigerant gases used in refrigeration and cooling systems by numerous facilities, including manufacturers, food processors, retailers, grocery stores, office buildings, municipalities and hospitals, just to name a few. Because of their chemical makeup, refrigerant gases contain significant levels of carbon in the form of chlorofluorocarbons (CFCs), hydrochlorofluorocarbons (HCFCs) and perfluorocarbons (PFCs). Use of these compounds has been regulated under the U.S. Clean Air Act for several years.

Greenhouse gases absorb and release radiation into the atmosphere, setting off a global warming effect on earth. The intent and overall goal of GHG tracking relates to better collection and management of the emissions data now so informed decisions can be made about future carbon trading schemes. The tracking protocols also help government entities to more accurately inventory the amounts of emissions reaching the atmosphere. The new GHG legislation puts in motion the data collection, organization, and first stage reporting mechanisms to allow the US to accurately calculate and maintain a GHG emissions baseline across the entire economy. This will allow for better understanding today as well as to determine progress for future Cap and Trade programs. With this accurate information, it can be determined if the guidelines are effective in lowering the harmful effects of these substances to the ozone layer.

Greenhouse Gas tracking involves measuring direct and indirect emissions and keeping extensive records on its usage, maintenance, leak containment and disposal. Heating and cooling systems, as well as other energy consumption, are defined as direct emissions.

Better and more effective GHG management is an objective of the current US government. No longer will the US sit by and watch the world attack the issue of climate change. The US is now taking action to lower carbon emissions to the betterment of future generations. By taking no action, the earth’s makeup would significantly change, with humans and animals adversely affected and marine and plant life severely damaged.

Greenhouse Gas (GHG) management and reporting is now falling under the EPA regulations contained within The U.S. Clean Air Act because the causes of global climate change is now well know. Human activities and the use of global warming substances, like refrigerant gases, are all leading to increased global warming. The substances are carbon dioxide, chlorine, bromine, nitrous oxide, chloroflurocarbons, hydrofluorocarbons, methane, methyl bromide, methyl chloroform, sulfur hexafluoride, hydroxyl, perfluorocarbobs, halons, carbon tetrachloride, fluorine, and the fluorinated gases hydrofluorinated ethers and nitrogen trifluoride. The mandatory law is aimed at reducing the use of these substances to lower the effects of global warming.

Beginning in 2010, GHG management, tracking, and reporting will be environmental law for the highest emitting facilities. Part of the management will revolve around better tracking and reporting of refrigerant gases. Entities must submit usage reports and service records for all refrigerants having high GWP. Special calculations are applied to refrigerants when any leads occur. The GHG emission reporting rules and related protocols allow for progressive companies to take advantage of software already created to help with carbon emissions reporting. Some web applications allow organizations to track GHGs to the asset level across global, distributed facilities.

Software provided by Verisae tracks carbon dioxide (CO2) gas emissions according to The Climate Registry protocols across all sites so companies can manage their carbon emissions and work towards reducing their carbon footprint. To learn more effective refrigerant management tactics and the tools, you can research http://www.Refrigerant-Tracker.com

Bees dying Green Tech News

Share and Enjoy